Layin ajiya na alewa mai laushi na GDT300- Injin Yinrich na Kayan Ado

1) Ana samun ikon sarrafa tsarin PLC/kwamfuta;

2) Faifan taɓawa na LED don sauƙin aiki;

3) Ƙarfin samarwa shine 300kgs/h (bisa ga alewa mono 7g akan mold 2D);

4) An yi sassan abincin da suka shafi kayan abinci masu tsafta daga bakin karfe SUS304;

5) Zabin kwarara (yawa) wanda masu canza mita ke sarrafawa;

6) A allurar da aka yi a layi, allurar da aka yi da kuma hanyoyin da aka yi amfani da su kafin a haɗa su don ƙara ruwa daidai gwargwado;

7) Famfon allurar allurar don allurar launuka, dandano da acid ta atomatik;

8) Saiti ɗaya na ƙarin tsarin allurar cakulan don yin alewa na tsakiya na cakulan (zaɓi ne);

9) Yi amfani da tsarin sarrafa tururi ta atomatik maimakon bawul ɗin tururi na hannu wanda ke sarrafa matsin lamba mai ƙarfi wanda ke ba da damar girki

10) Ana iya yin "jigilar launuka biyu", "jigilar layuka biyu", "cike tsakiya", alewa mai tauri "bayyananne" da sauransu.

11) Ana iya yin molds bisa ga samfuran alewa da abokin ciniki ya bayar.

• TECHNICAL SPECIFICATIONS

• Samfuri	GDT300
  Ƙarfin samarwa kg/h	Matsakaicin.300
  Matsakaicin samfurin g	7
  Saurin bugun jini n/min	25~35
  Amfani da tururi kg/h Matsi na tururi Mpa	200 0.2~0.6
  Ana buƙatar wutar lantarki	45kw/380V
  Amfani da iska mai matsewa Matsi na iska mai matsi	0.25mP3P/min 0.4-0.6 Mpa
  Yanayin da ake buƙata don tsarin sanyaya: 1) Zafin ɗaki(℃) 2) Danshi (%)	20~25 55
  Jimlar nauyi Kgs	7000